
When people think about package testing, the first thing that comes to mind is usually a box dropping from a certain height or getting shaken on a vibration table. But before your packaging ever gets to that stage, there’s a quiet — and often overlooked — step that can determine whether the rest of the test actually reflects what your product will experience in the real world: Environmental Conditioning.
What Is Environmental Conditioning?
Environmental Conditioning is the process of exposing packaging — or the packaged product — to specific, controlled temperature and relative humidity conditions inside an atmospheric conditioning chamber, before any physical performance test is carried out (drop, compression, vibration, etc.).
The goal is simple but critical: bring the packaging to equilibrium with the environment it will actually face during distribution, whether that’s a humid tropical climate, a cold warehouse in winter, or a truck trailer exposed to high temperatures on the road.
If this step is skipped, the results of subsequent tests can be misleading. Corrugated board that looks strong under normal lab conditions can lose up to 50% of its compression strength once it’s saturated with moisture.

Why Is It the First Step in Most ISTA Protocols?
ISTA 3-Series protocols — the most widely used to simulate the real-world distribution environment — frequently require a preconditioning profile, such as:
- Tropical/wet: high temperature combined with elevated relative humidity, simulating coastal climates or ocean export routes.
- Winter/frozen: below-freezing temperatures that affect the flexibility of plastics, adhesives, and seals.
- Standard laboratory ambient: a control condition used to compare results.
Without this step, any drop, compression, or vibration test performed afterward would be incomplete, since it wouldn’t account for how the material actually behaves once exposed to real transport conditions.
Materials Most Affected by Humidity and Temperature
Not all packaging materials react the same way, but these are the most sensitive:
- Corrugated board: loses stiffness and stacking strength when it absorbs moisture.
- Adhesives and tapes: can lose their bond under extreme heat or become brittle in the cold.
- Foams and plastics: change their flexibility and ability to cushion impacts.
- Medical device seals: seal integrity can be compromised by temperature cycling — a critical point for medical packaging.
Accelerated Aging: A Key Application
Environmental Conditioning is also used to run accelerated aging tests, where packaging is exposed to controlled conditions over a defined period to simulate, in compressed time, the effects of real-world aging — for example, the shelf life of a medical device or a consumer product. This allows manufacturing flaws and design defects to be detected long before the product reaches the market.
When Should You Consider This Test?
- If your product is exported to regions with climates very different from its origin (for example, from Tijuana to tropical markets or the northern U.S.).
- If your packaging passes through non-climate-controlled warehouses before reaching distribution.
- If you’re developing or redesigning packaging for medical devices and need to validate seal integrity.
- If your specific ISTA protocol requires it as a mandatory preconditioning step.
Conclusion
Environmental Conditioning isn’t an optional step or an “extra” in the packaging validation process — it’s the foundation that gives meaning to every physical test that follows. Skipping it can lead to results that look good in the lab but don’t actually predict what will happen on the real distribution route.
At Baja Testing Lab, we have atmospheric conditioning chambers and ISTA-certified protocols to accurately simulate the humidity and temperature conditions your product will face before it reaches your end customer.
Want to know which conditioning profile your packaging needs? Request a quote and our team will help you define the right protocol for your product.